How To Reset Wyze Camera: Quick And Easy Steps

Resetting your Wyze Cam can resolve a lot of frequent problems and is quick and simple. A straightforward reset frequently works well when resolving connectivity issues or relocating your How to Reset Wyze Camera?. You’ll need a paperclip or other such instrument to push the reset button on your Wyze Cam.

After it’s finished, your camera will restart, and you’ll be prepared for another setup. You can quickly get Wyze Cam back up and operating properly by following this guide’s instructions on how to reset it. Let’s begin!

My Wyze Cam abruptly stopped responding, and I was unable to determine why. I found a reset guide after doing some troubleshooting. After I followed the instructions, it worked! The procedure was quite easy, and I quickly resumed monitoring. Very pleased with the simple solution!

Table of Contents

How to Reset Wyze Camera?

Resetting a Wyze Camera can help resolve connectivity issues, remove previous settings, or prepare the camera for a new setup. Here’s a step-by-step guide for both soft reset (reboot) and hard reset (factory reset) methods.

Step-by-Step: How to Reset Wyze Camera

Method 1: Soft Reset (Reboot)

Best for minor glitches without losing settings.
Unplug the camera.
Take off the Wyze camera’s USB power wire from the back.
Wait 10 Seconds
Let the camera fully power down.
Plug It Back In
Reconnect the power cable to restart the camera.

Check Status 👇

The camera should reboot, and the status light will return to normal (solid blue or blinking, depending on setup).

Method 2: Hard Reset (Factory Reset)

Use this if you’re selling the camera, having major issues, or setting it up as new.

For Wyze Cam v3, v2, Pan, and others with a reset button:

Locate the Reset Button

On the bottom or back of the camera, find a small pinhole button labeled “Setup” or “Reset.”

Press & Hold the Button

Press and hold the button with a paperclip or SIM ejector tool for:
5 to 10 seconds (until the LED flashes or you hear a voice prompt).
Wyze Cam v3: Wait for the status light to turn solid yellow, then release.

Wait for Reset

The camera will reboot (may take 1–2 minutes).
The status light will flicker blue when it’s ready to be set up.

Reconfigure the Camera

To add a device, open the Wyze app, press “+,” and then follow the setup directions.
For Wyze Cam Outdoor (Battery-Powered):

Remove the camera from its base.

Holding down the power button for more than 15 seconds will cause the LED to glow red and blue.
Release: This will cause the camera to shut off and restart.
Re-pair it in the Wyze app.

Troubleshooting After Reset

Camera won’t reconnect? Ensure your Wi-Fi network is 2.4 GHz (Wyze doesn’t support 5 GHz for setup).
No status light? Check the power adapter and cable.
Still having issues? Contact Wyze Support.

How to Reset Wyze Camera V1?

Resetting your Wyze Cam v1 can assist in resolving connectivity problems or getting it ready for a fresh configuration if you’re experiencing problems with it. The instructions to reset your Wyze Cam v1 are as follows:

Make sure you have a power supply connected to your Wyze Cam v1.
On your tablet or smartphone, launch the Wyze app.
Find the camera’s setup button on the underside.
Holding down the setup button for 20 seconds will cause the yellow light to flash.
Hold off until the camera reboots and goes back to setup mode.
To set up your camera and reconnect to WiFi, follow the in-app instructions.
To make sure the reset was successful, test the camera.

How to Reset Wyze Camera v2?

A quick and easy method to resolve connectivity problems or get your Wyze Cam v2 ready for a fresh setup is to reset it. Just follow these steps to get your camera back up and running.

Make sure your Wyze Cam v2 is plugged in and turned on.
On your mobile device, launch the Wyze app.
Select the Wyze Cam v2 from the list of gadgets.
Hold down the setup button at the bottom of the camera for five seconds.
Wait for the yellow light that indicates reset mode to flash.
To reconnect your camera, adhere to the in-app instructions.
Reconfigure your Wyze Cam v2’s settings.

How to Reset Wyze Camera to New WiFi?

It’s easy to reset the Wyze camera to connect to a different WiFi network. To get your camera back online and functioning properly, follow these easy instructions.

Verify that your Wyze Cam is turned on and connected.
Open the Wyze app on your smartphone.
From the device list, select your camera.
To view the camera options, tap the gear icon.
Choose “WiFi Settings” after scrolling down.
Hold down the camera’s reset button for five seconds.
To connect to the new WiFi network, adhere to the instructions displayed on the screen.

How Can I Solve Wyze Camera v3 Factory Reset Issues?

There are several methods you can take to troubleshoot your Reset Wyze Camera v3 if the factory reset doesn’t work:

Make sure a functional power supply is attached to your Wyze Cam v3.
Holding down the setup button will cause the light to glow yellow for ten to fifteen seconds.
Try using a different power adapter or USB cord if the reset doesn’t begin.
Verify that the most recent version of the Wyze app is installed.
Try the reset procedure once more after restarting your WiFi router.
Look for any physical damage to the camera that can interfere with the reset button.
If none of these fixes work, get in touch with Wyze support.

Wyze Camera v2 Factory Reset Not Working?

If the factory reset on your Reset Wyze Camera v2 isn’t working, follow these steps to troubleshoot and fix it:

Verify that the camera is turned on and that the power supply is connected correctly.
For a complete reset, press and hold the setup button for ten seconds or more.
Check to see if the status light turns solid yellow, signifying that the reset has started.
If the reset doesn’t work, try using a new USB cable or power adapter.
To guarantee a steady connection, restart your router and try the reset once more.
Before trying another reset, update the Wyze app to the most recent version.
Contact Wyze support for more help if none of the above resolve the issue.

How to Reset Wyze Camera Outdoor?

You can quickly reset your Wyze Cam Outdoor to take care of connectivity issues or prepare the camera for a fresh configuration. To reset your Wyze Cam Outdoor, take these actions:

Make sure you have a power supply or that your Reset Wyze Camera Outdoor is completely charged.
Choose your Wyze Cam Outdoor from the list of devices when you launch the Wyze app.
Hold down the sync button on the base station for 10 seconds.
Await the yellow flashing status light, which signifies the beginning of the reset.
To reconnect the camera, follow the in-app instructions.
If required, adjust your WiFi settings.
After the reset, test the camera to make sure it’s operating properly.

Conclusion: How to Reset Wyze Camera

When you Reset Wyze Camera, the settings configuration file is deleted and the camera’s default settings are restored. When troubleshooting camera failures, it’s useful. Regardless of the brand and version of your camera, the procedure is simple.

If you’re having problems resetting the Wyze camera, try unhooking it from the app first. Flash the cam firmware manually if that isn’t enough. Reset Wyze Camera: I hope you got a clear idea.

5/5 - (1 vote)

How to Reset Wyze Camera: Quick and Easy Steps